TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 770 of 968

TM 9-2815-210-34-2-2

b .

Oil Cooler.

FRAME 1

1.

Put two preformed packings (1) and gasket (2) in place. Put oil cool element

(3) in place.

Put gasket (4) in place.

2.

Put cover (5) in place.

3.

If engine has top mounted-covered type manifold flame heater system, put

tube clamp (6) in place.

4.

Put on 12 lockwashers (7) and 12 nuts (8).

END OF TASK

5-141