TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 772 of 968

TM 9-2815-210-34-2-2

b .

Engines LD-465-1, LD-465-1C, LDT-465-1C, and LDS-465-1A.

FRAME 1

1.

Put tappet chamber cover with gasket (1) in place.

NOTE

Some engines have a ground strap (2) held on by tappet

chamber cover screw (3). If ground strap is used, do

steps 2 and 3.

If no ground strap is used, do step 4.

2.

If engine has ground strap (2), put ground strap in place. Put in screw with

flat washer and starwasher (3).

3.

Put in 10 screws with flat washers (4).

- .

4.

If no ground strap is used, put in 11 screws with flat washers (4).

END OF TASK

5-143