TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 771 of 968

TM 9-2815-210-34-2-2

5-27. TAPPET CHAMBER COVER.

a.

Engine LDS-465-1.

FRAME 1

1.

Put tappet chamber cover with gasket (1) on engine block (2).

2.

Put two flame heater tubes (3) and tube clamps (4) in place. Put in two

screws with flat washers (5).

3.

Put ground strap (6) in place.

Put in screw with starwasher (7).

NOTE

Put in screws with flat washers (8) only as shown. Two

screw holes (9) will be used to mount fuel filter.

4.

Put in six screws with flat washers (8).

END OF TASK

5-142