TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 767 of 968
TM 9-2815-210-34-2-2
FRAME 2
1.
Put compressor drive belt (1) on pulley (2). Put pulley on shaft (3). Put
on nut (4) and tighten nut to 100 pound-feet.
NOTE
As halves of pulley (2) come together, check that drive
belt spreads out evenly.
2.
Unscrew and take out two capscrews (5).
END OF TASK
5-138
Back to Top
