TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 754 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

NOTE

Tags and plugs put on during removal must be taken

off during replacement.

Put in nozzle (1) and tighten nut (2).

CAUTION

Do not use open end wrench to tighten fitting adapters

(3). Use only tubing wrench or box end wrench. Fail-

ure to use the correct tool may result in damage to fit-

ting adapters.

Put in two fitting adapters (3).

Put fuel inlet tube (4) and fuel return tube

(5) in place.

Put in two fitting nuts (6).

Put in spark plug with gasket (7) and tighten to 8 pound-inches. Put in

ignition lead (8).

END OF TASK

5-125