TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 750 of 968

TM 9-2815-210-34-2-2

FRAME 2

NOTE

Tags and plugs put on during removal must be taken

off during replacement.

1.

Put flame heater wiring harness (1) in place. Screw connector (2) onto fuel

supply solenoid valve (3).

2.

Screw connector (4) onto fuel return solenoid valve (5).

3.

Screw connector (6) onto fuel pump (7).

4.

Put ground lug (8) in place.

Put in screw, nut, and lockwasher (9).

GO TO FRAME 3

5-121