TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 870 of 968

TM 9-2815-210-34-2-2

FRAME 6

Soldier A

Soldiers

A and B

Soldier A

Soldier B

Soldier A

1.

Using hoisting equipment, raise engine assembly (1) just enough

to take weight off dynamometer test stand (2).

2.

Slide engine assembly (1) to the rear until eight screw holes in

flywheel adapter (3) are alined with screw holes in drive shaft

(4) .

3.

Hold drive shaft (4) in place so screw holes stay alined.

4.

Put in eight bolts (5) and lockwashers (6). Do not tighten

bolts .

5.

Lower engine assembly (1) all the way down and take off chain

sling (7)

.

GO TO FRAME 7

TA 118633

6-15