TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 862 of 968
TM 9-2815-210-34-2-2
FRAME 4
NOTE
Tell machine shop to make flywheel rear mounting plate
(1). See figure 6-3.
1.
Put flywheel rear mounting plate (1) on flywheel housing (2) as shown.
2.
Put in 12 cap screws (3) and lockwashers (4).
GO TO FRAME 5
6-7
Back to Top
