TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 852 of 968

TM 9-2815-210-34-2-2
FRAME 2
1.
Push generator (1) toward engine and put on two drive belts (2).
NOTE
Refer to TM 9-2320-211-20 for correct
belts (2).
2.
Pry generator (1) away from engine until drive
Tighten screw (3).
tension of drive
belts (2) are at correct tension.
3.
Hook air pressure hose (4) up to fitting (5) and tee fitting (6).
END OF TASK
TA 117774
5-22 3


Back to Top