TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 848 of 968

TM 9-2815-210-34-2-2

1.

Push generator (1) toward engine (2).

Put two drive belts (3) in place on

pulley (4).

Take off tags.

2.

Swing adjustment bracket (5) in place and put in screw with lockwasher and

step ‘washer (6).

Do not tighten screw.

NOTE

Refer to TM 9-2320-211-20 for correct drive belt tension.

3.

Pry generator (1) away from engine (2) until drive belts (3) are at correct

tension.

Tighten screw (6).

END OF TASK

5-219