TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 847 of 968

TM 9-2815-210-34-2-2

5-38. GENERATOR ASSEMBLY.

a.

Engines LD-465-1C and LDT-465-1C.

FRAME 1

Soldier A

Soldier B

NOTE

Some engines have one or more shims (3) between

generator (1) and mounting bracket (2). If shims (3)

were taken out during removal, they must be put back.

1.

Put generator (1) in place on mounting bracket (2). Hold it until

soldier B puts in mounting bolts.

2.

If shims (3) were used, put in correct number of shims. Put in

two bolts (4) with two washers (5).

Put on two more washers and

two nuts (6).

NOTE

Some engines use cotter pins (7).

3.

If cotter pins (7) were used, put in two cotter pins.

GO TO FRAME 2

5-218