TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 850 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

4.

5.

NOTE

Some engines do not use cotter pins (1).

Put in two cotter pins (1).

Push generator (2) toward engine. Put on two drive belts (3). Take off tags.

Pull generator adjusting bracket (4) into place. Put in screw (5) with

lockwasher (6) and step washer (7). Do not tighten screw.

NOTE

Refer to TM 9-2320-211-20 for correct tension of gener-

ator drive belts (3).

Pry generator (2) away from engine until tension of drive belts (3) is

correct.

Tighten screw (5).

NOTE

Some engines do not have ground strap (8).

Put ground strap (8) in place. Put in screw with washer (9).

END OF TASK

TA 117772

5-221