TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 853 of 968

TM 9-2815-210-34-2-2

5-39. STARTER ASSEMBLY.

a.

Engines LD 465-1, LD 465-1C, and LDT 465-1C.

FRAME 1

Soldier A 1.

Put gasket (1) on starter (2).

Put on adapter (3) and adapter

gasket (4).

WARNING

Starter (2) weighs fifty pounds. Be careful to hold

it up firmly when putting it on mounting studs. Starter

could fall and cause injury to personnel and damage

to equipment.

Soldiers 2 .

Put starter assembly (2) in place on engine flywheel housing (5).

A and B

Aline starter mounting holes (6) with flywheel housing studs (7).

Push starter assembly straight in.

Soldier A 3.

Hold starter assembly (2) until soldier B puts on lockwashers (8)

and nuts (9).

Soldier B 4.

Put on three lockwashers (8) and three nuts (9). Tighten nuts

to 140 to 150 pound-feet.

END OF TASK

TA 117767

5-224