TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 907 of 968

TM 9-2815-210-34-2-2
FRAME 3
1.
2.
3.
4.
5.
GO
Write down crankcase pressure from crankcase pressure gage (1).
Move throttle (2) back and open unload valve (3) until SPEED gage (4)
reads 500 RPM and POWER gage (5) reads 0 to 5 HP.
Write down oil pressure from gage (6) and write down idle speed.
Put throttle (2) to maximum position.
Write down engine rpm from SPEED
gage (4).
Slow down engine to 500 rpm for 15 minutes, then stop engine.
TO FRAME 4
6-52


Back to Top