TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 928 of 968

TM 9-2815-210-34-2-2

6-9. PLACING ENGINE IN SHIPPING CONTAINER.

FRAME 1

NOTE

Make sure container (2) is clean and dry inside. Check

that seal (5) and seal groove (6) are clean and not

damaged.

1.

Using chain hoist, lift engine (1) and move it so it hangs over container (2).

2.

Put two front support brackets (3) in place on engine (1). put in four bolts

with lockwashers and nuts (4).

3.

Put box (7) holding clutch parts on engine rear lifting bracket (8).

GO TO FRAME 2

6-73