TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 932 of 968

TM 9-2815-210-34-2-2
FRAME 5
Soldier B 1.
Soldier A 2.
Soldier B 3.
4.
NOTE
Before cover (1) is put in place, make sure it is clean
and dry inside.
Place five bags of desicant in container
(2) and coat rubber seal with sealing compound.
Using chain hoist, lift cover (1) over container (2).
Guide cover (1) so dowl pin (3) fits through dowl pin hole (4).
Lower cover (1) onto container (2).
Put in 36 bolts with lockwashers and nuts (5). Tighten bolts (5)
to 88 to 115 pound-feet
GO TO FRAME 6
6-77


Back to Top