TM 9-2815-220-24
FAN DRIVE CLUTCH ASSEMBLY AND ASSOCIATED PARTS
REPLACE/REPAIR
0129 00
INSTALLATION (Continued)
9. Torque-tighten 24 self-locking nuts (15) to
150-175 inch-pounds (17-19.8 N
•
m).
15
3
4
6
1
5
2
A
10. Install new seal (6) in seal housing (1).
a. Install seal (6) (item 191, WP 0175) in
housing (1) with lip of seal towards
bottom of housing and felt towards top.
11. Install seal housing (1) on fan tower (2).
a. Assuring that mating surfaces are clean,
place new gasket (5) (item 257,
WP 0175) on fan tower.
b. Install oil seal housing (1).
c. Secure using six screws (3) with flat
washers (4).
END OF WORK PACKAGE
WP 0129 00-17 (18 blank)