TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 1089 of 1563

TM 9-2815-220-24

ENGINE ON MAINTENANCE STAND INSTALLATION/REMOVAL

0130 00

REMOVAL (FROM STAND)

WARNING

Use of incorrect sling can cause lifting point failure leading to injury

or even death of personnel.

Engine models 2CA and 2DA, use sling Part Number 12257229

(item 38, WP 0176).

The front lifting points are as illustrated.

Engine model 2DR uses sling Part Number 11671664 (item 37,

WP 0176).

The front lifting points are not illustrated: the 2DR front

lifting points are located on the damper housing.

1. Attach sling (1) to hoist and to engine (2) at lifting eyes.

2. Take slack out of sling (1).

3. Remove four screws (5) with flat washers (6) from stand (3).

4. With helper guiding engine (2), lift engine out of stand (3).

5. Move stand (3) from under engine (2).

6. With helper guiding engine (2), lower engine onto flat surface.

7. Remove sling (1) from engine (2) and hoist.

END OF WORK PACKAGE

3

2

1

5, 6

WP 0130 00-3 (4 blank)