TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 1098 of 1563

TM 9-2815-220-24

FRONT LIFTING EYES AND GUIDES REPLACEMENT

0132 00

REMOVAL (Continued)

1. Remove left installation guide bar (1) and lifting eye (2).

a. Remove and discard four self-locking nuts (3).

b. Remove cushioned clamp (4) securing fuel return hose.

c. Remove and discard two self-locking nuts (5).

d. Remove two flat washers (6) then remove left installation guide bar (1).

Retain flat

washers (6) for installation.

e. Remove lifting eye (2) and gasket (7) from left side of damper housing.

Discard

gasket (7).

2. Remove right installation guide bar (8), lifting eye (2) and hour meter (9).

a. Disconnect hour meter (9) electrical connector (10).

b. Remove and discard four self-locking nuts (3).

c. Remove and discard two self-locking nuts (5).

d. Remove two flat washers (6) and right installation guide bar (8).

Retain flat washers (6)

for installation.

e. Remove hour meter (9).

f.

Remove lifting eye (2) from right side of damper housing.

WP 0132 00-2

8

5

6

3

9

3

10

2

7

3

1

6

2

4

3

2DR spacer plate: used in place of

installation guide bar.

5