TM 9-2815-220-24
FRONT LIFTING EYES AND GUIDES REPLACEMENT
0132 00
THIS WORK PACKAGE COVERS:
WP 0132 00-1
Removal, Installation
INITIAL SETUP:
Tools:
General mechanic’s tool kit (item 121, WP 0176)
Mandatory Replacement Parts:
Gasket (1) (item 182, WP 0175)
Self-locking nut (8) (item 140, WP 0175)
Self-locking nut (4) (item 34, WP 0175)
Personnel Required:
Track Vehicle Repairer (1) 63H10
Equipment Conditions:
Engine removed from vehicle and placed on a
flat stationary surface
(2DR) Throttle control solenoid removed for
maintenance of right lifting eye (WP 0123)
REMOVAL
NOTE
Engine Model 2DR does not have installation guide bars.
It does have
front lifting eyes and an hour meter as illustrated.
In addition, on the
right side it has a spacer plate in place of the installation guide bar.
Removal of lifting eyes is the same as for models 2CA and 2DA with
the exception of not having installation guide bars.
Early models 2CA and 2DA have hour meter mounted as illustrated.
Later models have the hour meter mounted on the engine top, right
side.