TM 9-2815-220-24
CRANKSHAFT MAIN BEARINGS INSPECTION
0138 00
INSPECTION (Continued)
3. Spread a thin coat of Prussian blue (item 25, WP 0173) over backs of upper and lower main
bearing halves (1, 2, 3, 4).
Contact pattern will be checked after inside diameter of installed
bearings has been checked.
4. Install bearings (1, 2, 3, 4) in their original locations.
a. Install bearings (1, 3) in crankcase (5).
b. Install bearing (2) in center (thrust) main bearing cap (6).
c. Install bearings (4) in main bearing caps (7).
7
4
3
6
2
1
5
WP 0138 00-3