Unsafe welding practices can cause serious injury from fire,
explosions, or harmful agents.
Allow only authorized personnel to
weld or cut metals.
Follow safety precautions in TC 9-237.
clothing and goggles must be worn, adequate protective equipment
used, a suitable fire extinguisher kept nearby, and requirements of
TC 9-237 strictly followed.
Do not attempt to start the engine until operation of electrical fuel
shutoff has been verified.
Failure to comply could cause injury to
Do not file, sand, or otherwise remove metal from fan blades since this
will disturb the balance of the fan.
An unbalanced fan could explode
causing serious injury or death to personnel.
Any repair of a fan
blade must be done at Depot.