TM-9-2815-220-24
AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines
TM-9-2815-220-24 - Page 193 of 1563
TM 9-2815-220-24
STANDARD MAINTENANCE INSTRUCTIONS
0028 00
INSPECTION (Continued)
Retaining Rings
Retaining rings are mandatory replacement parts.
Shafts and Spindles
Inspect shafts and spindles for excessive wear, binding, scoring, cracks, burrs, and obstructed
oil passages.
Repair or replace as necessary.
Splined Parts
Inspect splined parts for burrs, wear, and twisted, cracked or broken splines.
Repair or replace
as necessary.
Springs
1.
Reject springs for wear, distortion, breaks, and discoloration (evidence of overheating).
2.
Use indicator caliper to check spring length.
Physical specifications are contained in the work
package relating to the specific part.
Studs
Reject all studs for damaged or stripped threads, bent or loose condition, or for any signs of
stretching.
Thrust Washers and Shims
Reject thrust washers and shims for wear, distortion, scores, nicks, and burrs.
REPAIR
Standard repair instructions in this work package cover:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bearings
Bushings, liners, and bushing-type bearings
Castings
Dowel pins
Gears and shafts
Inserts
Oil seals
Oil transfer tubes
Painted parts
Preformed packings and gaskets
Snap rings
Splined parts
Springs
Studs
Threaded parts
Thrust washers and shims
WP 0028 00-13
Back to Top
