TM 9-2815-220-24
GENERATOR REPLACEMENT (650 AMPERE)
0051 00
REMOVAL (Continued)
3. Disconnect two electrical connectors (11, 12)
from generator.
18
17
16
15
13
14
12
19
20
11
NOTE
Use a suitable container to catch
oil that may leak out whenever any
oil line is loosened or removed.
Cap all tubes, hoses, and fittings to
prevent contamination.
4. Disconnect oil inlet hose (13) from
fitting (14).
5. Disconnect vent hose (15) from fitting (16).
6. Disconnect oil return hose (17) from
fitting (18).
7. Disconnect oil drain hose (19) at rear of
tee (20).
27
26
24
21
23
22
7
Ormat
26
26
25
Honeywell
7
25, 26
21
24
19
22, 23
20
8. Remove bracket (21).
a. Remove two screws (22) with flat-
washers (23) securing cradle (24) to
bracket (21).
b. Remove two screws (25) with flat
washers (26) securing ground straps (7)
and bracket (21).
c. Remove and retain ground straps (7).
d. Remove remaining two screws (27) with
flat washers (26) to remove bracket (21).
WP 0051 00-4