TM 9-2815-220-24
GENERAL INFORMATION (Continued)
0001 00
WP 0001 00-3
PREPARATION FOR STORAGE OR SHIPMENT
Refer to Work Package 0098, Engine and Container Replacement, for instructions on preparation
for storage and shipment.
ADMINISTRATIVE STORAGE
See AR 750-1 for the requirements for administrative storage of Army materiel.
NOMENCLATURE CROSS – REFERENCE LIST
In general, nomenclature used in this manual is in accordance with the terms used for provisioning
as they appear in the Repair Parts and Special Tools List (RPSTL).
A few tools, parts, and components are, however, referred to by names more common than those
in the RPSTL.
NOMENCLATURE
COMMON NAME
Cable assembly
Wiring harness or lead assembly
Gauge rod
Dipstick
Hand hammer
Plastic-faced hammer
Hinged handle
Breaker bar
Insert wrench
Drive wrench
Key, woodruff key, machine key
Key
Metal seal ring
Shaft seal
Retaining ring
Snap ring
Safety glasses
Goggles
Safety wire
Lock wire
Screw-thread inserter
Drive wrench
Screw-thread remover
Removal tool
Shipping/storage container
Container
Socket head screw key
Hex key
Spring resiliency tester
Spring scale
Threaded insert remover
Removal tool
Transmitter
Sending unit
Wire rope
Cable
LIST OF ABBREVIATIONS
A list of common abbreviations including symbols and a glossary are included in Work Package
00179.
QUALITY OF MATERIAL
Material used for replacement, repair, or modification must meet the requirements of this manual.
If quality of material requirements is not stated in this manual, the material must meet the