TM 9-2815-220-24
SIGNAL WIRING HARNESS REPLACEMENT (2CA) (PN 12254376, 12354385) 0057 00
REMOVAL (Continued)
18. Remove harness angle brackets (85) at front of engine.
a. Remove screws (86) with flat washers (87).
Remove angle brackets (85).
85, 86, 87
b. Disconnect electrical connector (66) at LVPM (65).
c. Remove four screws (88) with lock washers (89) securing low voltage protection module
bracket (90) to engine block.
Discard lock washers.
d. Remove two screws (91) with four lock washers (92) and two self-locking nuts (93)
securing low voltage protection module (65) to mounting bracket (90).
Discard lock
washers and self-locking nuts.
WP 0057 00-14
91
90
92
65
93
89
66
88