TM 9-2815-220-24
SIGNAL WIRING HARNESS REPLACEMENT (2CA) (PN 12254376, 12354385) 0057 00
REMOVAL (Continued)
12. Disconnect automatic water separator harness.
a. Remove screw (50) with lock washer (51).
Discard lock washer.
b. Remove loop clamp (52).
c. Disconnect electrical connector (53) at fuel water separator control unit (54).
Cut tie wraps (55) as needed.
13. Remove wiring (56) to left manifold heater exciter.
a. Remove screw (57) with lock washer (58).
Discard lock washer.
b. Remove loop clamp (59).
56
54
59
57, 58
53
55
52
50, 51
WP 0057 00-7