TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 377 of 1563

TM 9-2815-220-24
WIRING HARNESS AND CABLE REPAIR
0056 00
REPLACEMENT OF CONNECTORS (Continued)
Disassembly of Typical Female-Type Panel Mounting Receptacle with Ridged Locking Nut
1. Unscrew nut (A) from shell assembly (B) and slide back on cable (C).
2. Slide grommet (D) back on cable (C) leads.
3. Drive socket contacts (E) out through rear of shell (F) with socket extractors.
4. Using soldering gun (item 108, WP 0176), unsolder leads from socket contacts (5).
Assembly of Typical Female-Type Panel Mounting Receptacle with Ridged Locking Nut
1. Strip cable (C) insulation equal to depth of wells in socket contacts (E).
2. Slide nut (A) onto cable (C).
3. Slide grommet (D) over cable (C) leads.
4. Insert cable (C) leads into wells of socket contacts (E) and solder (using item 38, WP 0173).
5. Push socket contacts (E) into shell (F) from rear until seated.
6. Push grommet (D) down cable (C) leads and over wells of socket contacts (E).
7. Screw nut (A) onto shell assembly (B).
D
F
A
B
E
C
WP 0056 00-17


Back to Top