TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 378 of 1563

TM 9-2815-220-24

WIRING HARNESS AND CABLE REPAIR

0056 00

REPLACEMENT OF CONNECTORS (Continued)

Disassembly of Typical Female-Type Plug with Ridged Locking Nut

1. Heat boot (A) on shell assembly (B) and roll back on cable (C).

2. Unscrew nut (D) from shell assembly (B) and slide back on cable (C).

3. Drive socket contacts (E) out through rear of shell (F) with socket extractors.

4. Using soldering gun (item 108, WP 0176), unsolder or cut leads from socket contacts (E).

Assembly of Typical Female-Type Plug with Ridged Locking Nut

1. Strip cable (C) insulation equal to depth of wells in socket contacts (E).

2. Slide nut (D) onto cable (C).

3. Insert cable (C) leads into wells of socket contacts (E) and solder (using item 38, WP 0173) or

crimp.

4. Push socket contacts (E) into shell (F) from rear until seated.

5. Screw nut (D) onto shell assembly (B).

6. Apply a thin even layer of adhesive (item 1, WP 0173) to shell assembly (B) and roll boot (A)

onto shell assembly (B).

D

F

E

A

B

E

C

WP 0056 00-18