TM 9-2815-220-24
SIGNAL WIRING HARNESS REPLACEMENT (2CA) (PN 12254376, 12354385) 0057 00
INSTALLATION (Continued)
12. Install harness into retaining straps.
a. Install harness into retaining straps (9) using four screws (10) with new lock washers (11)
(item 92, WP 0175).
b. Connect electrical connector (12) at flame start exciter (13).
12
13
10, 11
(four places)
9
c. Install harness into retaining straps (6).
d. Install retaining straps (6) with four screws (7) using new lock washers (8) (item 93,
WP 0175).
13. Install harness end connector (1) into wiring harness upper bracket (5) using
four machine screws (2) with new lock washers (3) (item 91, WP 0175) and nuts (4).
END OF WORK PACKAGE
1
6
7, 8 (four places)
5
2, 3, 4 (four places)
WP 0057 00-27 (28 blank)