TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 604 of 1563

TM 9-2815-220-24

OIL LEVEL GAUGE ROD REPLACEMENT/REPAIR

0076 00

DISASSEMBLY

1. Remove oil level indicator tube neck (13).

14

15

16

17

20

20

18

19

13

21

a. Remove two cap screws (14) with lock

washers (15).

Discard lock washers.

b. Remove and discard gasket (16) and two

O-rings (17).

2. Remove spring (18).

3. Remove and discard preformed packing (19).

NOTE

Do not remove two cap screws (20)

fastening cap (21) to neck (13)

unless inspection indicates

replacement is necessary.

The

screws are staked in place.

3. If necessary, remove two cap screws (20).

CLEANING

1. See Work Package 0028 for Standard

Cleaning Procedures.

INSPECTION

All parts must be inspected with care.

Replace parts if damage or wear exceeds allowable

limits.

1. See Work Package 0028 for Standard Inspection Procedures.

ASSEMBLY

1. Install new preformed packing (19) (item 285, WP 0175) in cap (21).

2. Assemble cap (21) to neck (13).

a. Position cap (21) over tabs on neck (13) and secure with two screws (20).

b. Snug-tighten two screws (20) so that cap (21) can open and close freely.

c. Stake two screws (20) in place.

3. Install spring (18).

WP 0076 00-4