TM 9-2815-220-24
CYLINDER OIL DRAIN TUBES REPLACEMENT
0077 00
REMOVAL (Continued)
4. Remove right bank cylinder drain tube assembly (18).
a. Remove six fluid passage bolts (19) (one at each cylinder).
1. As each fluid passage bolt is removed, remove copper gasket (20) on each side of tube.
Discard gaskets (20).
b. Remove drain tube assembly (18).
c. Relieve tension on clamps (21) and reposition clamps (21) off hoses (22).
d. Separate tubes (23, 24, and 25) from hoses (22).
5. Discard hoses (5, 7, 11, 16, and 22).
DAMPER END
RIGHT BANK
16
18
19
20
FLYWHEEL END
22
21
11
7
5
25
24
23
WP 0077 00-3