TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 617 of 1563

TM 9-2815-220-24

CYLINDER OIL DRAIN TUBES REPLACEMENT

0077 00

INSTALLATION (Continued)

8. Install [right bank damper end] oil drain tube (12).

a. Position clamp (15) onto tube (12) far enough towards flange end to be out of the way.

b. Install new lubricated hose (16) (item 313, WP 0175) half way onto tube and secure with

clamp (15) with lubricating oil (item 21, WP 0173).

c. Place a clamp (15) on tube (25) and push hose (16) with tube (12) onto tube (25).

d. Install tube (12) to oil pan, using new gasket (17) (item 159, WP 0175).

e. Secure tube (12) to oil pan using two screws (13) with new lock washers (14) (item 93,

WP 0175) and at opposite end to tube (25) with clamp (16).

25

DAMPER END

FLYWHEEL END

RIGHT BANK

12

17

14

13

15

16

15

WP 0077 00-11