OIL LEVEL GAUGE ROD REPLACEMENT/REPAIR
2. Install left front upper cover (1).
a. Place cover (1) in position.
b. Position clamp (3) as illustrated.
c. Move wiring harness bracket (4) with wires attached into position.
There are twelve screws that fasten the cover.
Some of the screws
serve a dual purpose: four also fasten the generator wiring harness
bracket, and another secures a clamp for the smoke generating fuel
d. Secure cover (1) with assembled washer screws (11).
END OF WORK PACKAGE
WP 0076 00-6