TM 9-2815-220-24
SENDING UNITS AND SWITCH REPLACEMENT (2CA, 2DA)
0092 00
INSTALLATION
NOTE
Use thread sealing product (item 29, WP 0173) on all threaded
connections.
Adjoining threaded connections that might be disturbed during the
disassembly process should be removed, cleaned, and resealed during
reassembly.
1. Install switches (5, 6, 7) at vibration damper housing (8).
a. If removed, install bushing (9) into damper housing (8).
b. Install engine oil temperature sending unit (5) into bushing (9).
c. Install engine oil high temperature switch (6) into damper housing (8).
d. Install engine oil low pressure switch (7) into pipe reducer (10).
10
9
8
7
6
5
WP 0092 00-3