OIL COOLER ACCESS COVERS AND FRAMES REPLACE/REPAIR
1. See Work Package 0028 for General Cleaning Procedures.
All parts must be inspected with care.
Replace parts if damage or wear exceeds allowable
1. See Work Package 0028 for General Inspection Procedures.
1. Replace plate (6 or 29) nuts.
a. Caged nuts (6 or 29) may be replaced by
bending tabs (A), on either side, open and
replacing caged nuts.
Unsafe welding practices can cause serious injury from fire,
explosions, or harmful agents.
Allow only authorized personnel to
weld or cut metals.
Follow safety precautions in TC 9-237.
clothing and goggles must be worn, adequate protective equipment
used, a suitable fire extinguisher kept nearby, and requirements of
TC 9-237 strictly followed.
b. If caged nut (6 or 29) tabs (A) are damaged, caged nuts may be chiseled loose and a new
caged nut spot welded in place.
END OF WORK PACKAGE
WP 0090 00-4