TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 826 of 1563

TM 9-2815-220-24

FLYWHEEL AND SPUR GEAR REPLACEMENT (2CA, 2DA)

0102 00

INSTALLATION (Continued)

3. Install spur gear (5).

a. Place spur gear (5) in position on dowel pins (8) which protrude through flywheel (2).

b. Fasten spur gear (5) and flywheel (2) to crankshaft with nine screws (4).

c. Using torque wrench, 500 - 2500 inch/pounds, (item 126, WP0176) alternately tighten

screws (4) to 1300-1350 inch-pounds (146.8-152.5 N•m).

d. Go to beginning of this work package and check flywheel run-out if a new flywheel was

installed.

2

4

5

8

8

END OF WORK PACKAGE

WP 0102 00-6