TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 832 of 1563

TM 9-2815-220-24

FLYWHEEL AND ADAPTER REPLACEMENT (2DR)

0103 00

INSTALLATION (Continued)

WARNING

Flywheel is heavy.

Be sure that lifting device is attached and do not

allow flywheel to swing about uncontrolled.

Failure to comply may

result in personal injury.

2. Install flywheel (4).

a. Install eye bolt (5) (item 11, WP 0176) in threaded hole provided in flywheel (4), and

attach to hoist (6).

b. Turn crankshaft as necessary to align dowel pin (8) with hole in flywheel (4).

c. Slide flywheel (4) onto adapter (9).

d. Apply lubricant (item 23, WP 0173) to threads of eight screws (7) prior to installation.

e. Secure flywheel (4) with eight screws (7) and alternately torque to 1300-1350 inch-pounds

(146.8-152.5 N

•

m).

f.

Remove eye bolt (5).

3. Go to beginning of work package and recheck flywheel run-out.

6

4

5

8

9

4

5

7

END OF WORK PACKAGE

WP 0103 00-6