TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 824 of 1563

TM 9-2815-220-24

FLYWHEEL AND SPUR GEAR REPLACEMENT (2CA, 2DA)

0102 00

CLEANING

1. See Work Package 0028 for General Cleaning Procedures.

INSPECTION

All parts must be inspected with care.

Replace parts if damage or wear exceeds allowable

limits.

1. See Work Package 0028 for General Inspection Procedures.

INSTALLATION

1. Install eyebolt (6) (item 65, WP 0176) in threaded hole of flywheel (2).

WARNING

Flywheel is heavy.

Be sure that lifting device is attached and do not

allow flywheel to swing about uncontrolled.

Failure to comply may

result in personal injury.

8

2

6

7

2. Install flywheel (2).

a. Attach a suitable lifting device (7) and

align dowel pin holes in flywheel (2)

with dowel pins (8) in crankshaft.

b. Rotate crankshaft as necessary to align

dowel pins (8) with holes in flywheel (2).

WP 0102 00-4