TM 9-2815-220-24
ROCKER ARM ASSEMBLY AND COVER REPLACEMENT
0104 00
INSTALLATION (Continued)
11. Install camshaft drive housings (10) at cylinders 6 right and left.
a. Assure that O-ring (12) is not damaged and is in place.
If O-ring is damaged go to
WP 0146 to remove camshaft.
b. Position housing (10) against cylinder and secure with screws (7).
c.
Torque screws (7) to 400-450 inch-pounds (45.2-50.8 N
•
m) (using item 125, WP 0176).
7
7
7
11
12 (concealed O-ring)
10
WP 0104 00-13