TM 9-2815-220-24
ROCKER ARM ASSEMBLY AND COVER REPAIR
0105 00
WP 0105 00-2
DISASSEMBLY
1. Check rocker arm (1) side clearance.
a. Check side clearance (A) between rocker arm cover (2) and rocker arm (1), using a feeler
gauge.
Replace rocker arms that do not meet the specifications in the following table.
Location
Sizes and Fits of New
Parts inches (mm)
Wear Limits
A
(Side clearance between
rocker arm cover and
rocker arm)
0.0060 (0.1524)
0.0140 (0.3556)
0.0200 (0.508)
1
A
2
2. Remove rocker arm assembly (3) from
cover (2).
2
3
6
5
4
1
7
a. Remove machine thread plug (4).
b. Remove straight shaft (5) and rocker arm
assembly (3) from rocker arm cover (2).
3. Remove jam nut (6) and adjusting screw (7)
from rocker arm (1).