TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 982 of 1563

TM 9-2815-220-24

FUEL/WATER SEPARATOR CONTROL MOUNTING PLATE

REPLACEMENT

0121 00

CLEANING

1. See Work Package 0028 for Standard Cleaning Procedures.

INSPECTION

All parts must be inspected with care.

Replace part if damage or wear exceeds allowable

limits.

1. See Work Package 0028 for Standard Inspection Procedures.

INSTALLATION

1. Install fuel/ water separator control mounting plate (1).

a. Apply a small amount of Lubriplate (item 23, WP 0173) to four bolts (2).

b. Position fuel/ water separator control mounting plate (1) onto engine block.

c. Install four bolts (2) with new lock washers (3) (item 86, WP 0175), and clamp (4).

d. Tighten four bolts (2) to 13 to 15 foot-pounds (18-20 N

•

m), using torque wrench (item

127, WP 0176).

2

4

3

1

END OF WORK PACKAGE

WP 0121 00-2