TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 986 of 1563

TM 9-2815-220-24

THROTTLE CONTROL AND MANUAL FUEL SHUTOFF (2CA, 2DA)

0122 00

DISASSEMBLY

WARNING

Retaining rings are spring tension devices:

take care when removing

or installing them.

They can slip or break and become airborne

causing eye damage or other bodily harm.

1. Place throttle cross shaft assembly (12) in a machinist's vise and remove retaining ring (14)

from straight shaft (15).

Discard retaining ring.

2. Remove bearing (16) using a suitable puller then remove retaining ring (17) from straight

shaft (15).

Discard retaining ring and bearing.

3. Remove screw (18) and lock washer (19) from throttle lever assembly (8).

Discard lock

washer.

4. Remove throttle lever assembly (8) and woodruff key (20) from straight shaft (15).

Discard

woodruff key.

5. Remove retaining ring (21) and flat washer (22) from straight shaft (15).

Discard retaining

ring.

6. Remove manual fuel shutoff lever assembly (23) from straight shaft (15).

Plain seals (24) and

sleeve bearings (25) will be replaced in "Repair" of this work package.

7. Remove flat washer (26) and retaining ring (27) from straight shaft (15).

Discard retaining

ring.

12

23

22

21

25

24

25

24

27

26

14

16

15

8

17

18

19

20

WP 0122 00-4