TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 988 of 1563

TM 9-2815-220-24

THROTTLE CONTROL AND MANUAL FUEL SHUTOFF (2CA, 2DA)

0122 00

CLEANING

1. See Work Package 0028 for General Cleaning Procedures.

INSPECTION

All parts must be inspected with care.

Replace parts if damage or wear exceeds allowable

limits.

1. See Work Package 0028 for General Inspection Procedures.

2. Measure outside diameter of straight shaft (15) at points (A and B), using outside micrometer

(item 17, WP 0176).

a. Replace shaft if measurement is not within limits in the following table.

Location

Sizes and Fits of New Parts inches (mm)

Wear Limits

A

(Bearing areas)

0.6249 (15.87)

0.6252 (15.88)

0.6246 (15.86)

B

(Fuel shutoff lever)

0.6232 (15.83)

0.6252 (15.88)

0.6217 (15.79)

3. Visually inspect throttle lever housing (8) and pin (45).

1

A

A

B

5

4. Visually inspect fuel shutoff lever assembly (23).

Refer to WP 0028.

(Sleeve bearings (46)

will be replaced in "Repair" of this work package.)

46

46

23

45

8

WP 0122 00-6