TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 113 of 554

TM 9-2815-224-34&P

Crankshaft Maintenance Instructions (Cont)

CAUTION

Use care when removing crankshaft pulley.

Do not pry on vibration damper or damage can

occur.

(3)

Remove crankshaft pulley (7).

(4)

Remove two keys (8).

b. Installation

(1)

Lubricate end of crankshaft (1) with

lubricating oil.

(2)

Install two keys (2) in end of

crankshaft (1).

(3)

Install crankshaft pulley (3) on

crankshaft (1).

(4)

Install screw (4) and retainer (5).

(5)

Tighten screw (4) to 180 lb-ft (224 N•m).

(6)

Strike head of screw (4) with soft face

hammer.

NOTE

Some models of crankshafts have a Grade 8

screw. Skip steps (7) and (8) and do steps

(8.1)

and (8.2) for those models.

(7)

Tighten screw (4) to 300 lb-ft (407 N•m)

and strike screw again.

(8)

Tighten screw (4) to 300 lb-ft (407 N•m).

(8.1)

Tighten screw (4) to 450 lb-ft (610 N•m)

and strike screw again.

(8.2)

Tighten screw (4) to 450 lb-ft (610 N•m).

Change 2 4-3