TM-9-2815-224-34-P
ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JANUARY 1988
TM-9-2815-224-34-P - Page 133 of 554
TM9-2815-224-34&P
Crankshaft Maintenance Instructions (Cent)
(13)
Install five bearing caps (12).
(14)
Strike bearing caps (12) with
soft-face hammer.
CAUTION
When installing bearing cap screws on
engines built prior to Serial No. 8VF085
replace all ten flanged head screws
with new 12-point screws with
captured washers. If engine has new
type screws, individual screws may be
replaced. Mixing of old type and new
type screws may cause damage to
engine.
187
(15)
Install ten screws (15).
(16)
Tighten ten screws (15) to 50 lb-ft (68 N-m).
(17)
Strike bearing caps (12) with soft-face hammer.
(18)
Tighten ten screws (15) to 110 lb-ft (149 N-m).
(19)
Tighten ten screws (15) to 230 to 240 lb-ft (312 to 325 N-m).
4-23
Back to Top
