TM 9-2815-224-34&P
Crankshaft Maintenance Instructions (Cont)
4-6. CRANKSHAFT COVER AND FRONT SEAL REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Oil, lubricating, Item 48, Appendix C
Grease, automotive and artillery, Item 36,
Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-20 Alternator support and
adjusting strap removed.
Para 4-3
Vibration damper removed.
Para 8-3
Oil pan removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Removal.
(1)
Support engine with a suitable lifting device.
(2)
Remove two screws (1) six washers (2) and two locknuts (3) from support (4).
4-28