TM9-2815-224-34&P
CHAPTER 5
FLEXPLATE AND FLYWHEEL HOUSING MAINTENANCE
Contents
Para Page
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5-1
FlexplateRemoval/Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:2
5-1
Flywheel Housing and Rear Oil Seal Removal/Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
5-3
Section I.
INTRODUCTION
5-1. GENERAL.
This chapter includes removal, installation, and repair of the flexplate and flywheel
housing. The subassemblies and parts which must be removed before the flexplate and the flywheel
housing components can be removed will be referenced to other paragraphs or chapters of this manual,
TM 9-2320-279-10, TM 9-2320-279-20, or TM 9-2320-279-34.
Section Il.
FLEXPLATE AND FLYWHEEL HOUSING
Flexplate and Flywheel Housing Maintenance Instructions
5-2. FLEXPLATE REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-34 Transmission removed from
None
engine.
Supplies
Special Environmental Condition
Compound, international, No. 2, Item 26,
None
Appendix C
General Safety Instructions
Personnel Required
None
MOS 63W, Wheel vehicle repairer
Level
of Maintenance
Direct Support
5-1