TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 152 of 554

TM9-2815-224-34&P

Flexplate and Flywheel Housing Maintenance Instructions (Cont)

5-3. FLYWHEEL HOUSING AND REAR OIL SEAL REMOVAL/INSTALLATION (CONT). [

CAUTION

Screw inside access hole must

be removed. Failure to remove

screw may cause flywheel

housing to crack when hoisted

from engine.

NOTE

Screw must not be reused.

(22)

(23)

Remove screw (48) from

access hole,

Install four alining studs

from alinement stud set in

engine block (49).

WARNING

Make

secured. Keep hands and feet

out from under flywheel

housing when removing from

engine. Falling parts may

cause

(24)

(25)

(26)

sure lifting device is

serious personal injury.

Remove flywheel

housing (1) from rear end of

engine block (49).

Remove pipe plug (50) from

bottom of flywheel

housing (1).

Remove pipe plug (51 ) from

back side of flywheel

housing (1).

5-8