TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988
TM-9-2815-224-34-P

  TM-9-2815-224-34-P - Page 164 of 554

TM 9-2815-224-34&P
Flexplate and Flywheel Housing Maintenance Instructions (Cont)
5-3.
FLYWHEEL HOUSING AND REAR OIL SEAL REMOVAL/INSTALLATION (CONT).
(45)
Install base on end of crankshaft (7) with two
guide studs. Tighten guide studs until base
is firmly against end of crankshaft.
(46)
Install spacer over center screw of base.
(47)
(48)
Install installation tool housing, with sleeve
(56) and oversize oil seal (57), onto guide
studs with thrust washer and nut. Tighten
nut by hand until snug. Further tighten nut
until installation tool housing is seated
against base.
Remove installation tools from end of
crankshaft (7).
5-18.2 Change 2


Back to Top